The MS-1224 is a rectangular removable label that is 3/4″ X 1-1/2″. Occasionally folks would like to print on these labels, so we’ve got some caveats before proceeding. Firstly, this label was originally designed for hand applications, and is removable. Some laser printers run very hot, and some printers have tight roller paths that the label sheet must travel on. Since this label is also removable, be aware that this label could detach from the backing sheet and become stuck in your printer. If you’ve already printed small sheeted removable labels in your printer, and are comfortable with printing them, you can use the following template:   Also be aware that printers physical margins vary from printer to printer. Your particular printer may not print at the outer margins (left,right,top,bottom). This can vary from 0″ to 3/4″. So printing on these small sheets may cover only the inner rows and columns. One more thing, if you’re having problems with the text not fitting, search our blog for ‘Vertical Text’ to help you get the text to run vertically in each cell. It’s much easier to change the text to vertical rather than change the orientation of the small sheet to landscape.:). Just one more thing, cut out sheets of the same size to do test prints rather than wasting you’re labels.