The M-5352 Labels are 10 up (10 labels per sheet) that can be used in all plain toner copiers. These labels are great because they take up almost all of the real estate on the page which offers more space to print, whereas the ML-1000 has small borders on the left and right.
If you’re having trouble creating a template, no need to fret, we’ve created a template specifically for the M-5352.
Click on the picture below to download the template:
The MS-610 is a 3/8″ X 5/8″ removable label. This label is great for labeling small items like jewelry boxes, or small products. Beware though, printing on these little guys is tricky. Depending on the printer you have, the printing might not be as exact as one would expect. If you’re printing small images on these labels, getting them to line up can be just about impossible because they are so small.
If you’re using Microsoft Word, and you’d like to set these up yourself, here are the values you need to set up this custom label:
Top margin .06
Side margin .05
Vertical pitch .42
Horizontal Pitch .67
Label height .38
Label width .63
Number across 6
Number down 12
Page size: Custom
Page width 4.08
Page Height 5.16
Use only if you know your printer can handle these removable labels, and they won’t come off in your printer.
Here is our MS-3232, 2″ X 2″ Square label. The Adhesive is removable. It has a variety of uses including labeling merchandise. It can also be used as a temporary correction marker in printed documents. Make a short correction comment on the MS-3232 label and stick it at the spot on the page where you want the correction to be.
Click on the picture below to download the template for the MS-3232
The MS-8048 is a 5″ X 3″ removable label. It comes on a single sheet, so the sheet size is a little bit larger than the label to make it easy to peel the label from the sheet. If you’ve found this page before making the template, and you’d just like to download the template here, feel free to do so. Just click on the picture below to download the template.
Here is the MS-1020 label template. Each rectangular label on the small sheet is 5/8″ X 1-1/4″. The labels run lengthwise on the long dimension of the sheet. So when running them through a printer, it’s probably best to use a vertical font, which is in the template below.
These labels were originally designed for hand applications, and they are also removable. While customers use these templates to print, be aware that they can come off in the printer due to the fact that they are removable and there are also high heat conditions in some laser printers, and some very tight printer roller paths in some printers.
The MS-1224 is a rectangular removable label that is 3/4″ X 1-1/2″. Occasionally folks would like to print on these labels, so we’ve got some caveats before proceeding. Firstly, this label was originally designed for hand applications, and is removable. Some laser printers run very hot, and some printers have tight roller paths that the label sheet must travel on. Since this label is also removable, be aware that this label could detach from the backing sheet and become stuck in your printer. If you’ve already printed small sheeted removable labels in your printer, and are comfortable with printing them, you can use the following template:
Also be aware that printers physical margins vary from printer to printer. Your particular printer may not print at the outer margins (left,right,top,bottom). This can vary from 0″ to 3/4″. So printing on these small sheets may cover only the inner rows and columns.
One more thing, if you’re having problems with the text not fitting, search our blog for ‘Vertical Text’ to help you get the text to run vertically in each cell. It’s much easier to change the text to vertical rather than change the orientation of the small sheet to landscape.:).
Just one more thing, cut out sheets of the same size to do test prints rather than wasting you’re labels.